How To Adjust Wren Kitchen Doors

How to Adjust Wren Kitchen Doors

Wren kitchen doors are designed to be easy to adjust, so you can keep them looking their best. Here are the essential aspects of how to adjust Wren kitchen doors:

Tools and Materials

You will need the following tools and materials:

Phillips head screwdriver
Allen key
Measuring tape
Level

Check the Door Alignment

Before you start adjusting the doors, you need to check the alignment. Open the door and measure the gap between the door and the cabinet frame. The gap should be even on all sides.

If the gap is not even, you need to adjust the hinges. To do this, use an Allen key to loosen the screws on the hinges. Once the screws are loose, you can move the door until the gap is even. Then, tighten the screws.

Adjust the Door Height

To adjust the door height, you need to use a Phillips head screwdriver. Locate the screws on the top and bottom of the door hinges. Loosen the screws slightly, and then move the door up or down until it is level. Then, tighten the screws.

Adjust the Door Depth

To adjust the door depth, you need to use a Phillips head screwdriver. Locate the screws on the sides of the door hinges. Loosen the screws slightly, and then move the door forward or backward until it is the desired depth. Then, tighten the screws.

Tips

Here are a few tips for adjusting Wren kitchen doors:

Take your time and be patient. Adjusting kitchen doors can be a little tricky, but it is important to do it correctly.
If you are having trouble adjusting the doors, you can always contact Wren customer service for help.
Once you have adjusted the doors, check them regularly to make sure they are still aligned properly.