How To Cut Crown Molding Corners On Kitchen Cabinets

How to Cut Crown Molding Corners on Kitchen Cabinets

Crown molding is a decorative element that can add a touch of elegance to your kitchen cabinets. It can be used to frame the top of the cabinets or to create a more elaborate design. Cutting crown molding corners can be a bit tricky, but with the right tools and techniques, you can get professional-looking results.

Here are the steps on how to cut crown molding corners on kitchen cabinets:

Materials you'll need:

Crown molding
Miter saw
Measuring tape
Pencil
Caulk gun
Caulk

Steps:

1. Measure and mark the crown molding:

Start by measuring the length of the cabinet where you want to install the crown molding. Then, mark the length on the crown molding and make a cut at a 45-degree angle using a miter saw.

2. Cut the second piece of crown molding:

Measure the length of the second piece of crown molding and make a cut at a 45-degree angle in the opposite direction of the first cut. This will create a mitered joint.

3. Dry fit the crown molding:

Place the two pieces of crown molding together to make sure they fit correctly. If the joint is not tight, you may need to adjust the angles of the cuts.

4. Apply caulk to the mitered joint:

Once you are satisfied with the fit of the crown molding, apply a thin bead of caulk to the mitered joint. This will help to seal the joint and prevent gaps.

5. Install the crown molding:

Finally, install the crown molding on the cabinet by nailing it into place. Make sure that the nails are countersunk below the surface of the crown molding.