How To Fit Door Handles On Kitchen Units

Door handles are an essential part of any kitchen unit, and they can make a big difference to the overall look and feel of your kitchen. If you're replacing your old door handles or installing new ones on new units, it's important to do it correctly to ensure they're secure and function properly.

Measuring And Marking

The first step is to measure and mark the position of the door handles. For most standard kitchen units, the handles should be positioned in the center of the door, both horizontally and vertically. Use a pencil to mark the position of the screw holes.

Drilling Pilot Holes

Once you've marked the position of the screw holes, it's time to drill pilot holes. This will help to prevent the wood from splitting when you insert the screws. Use a drill bit that is slightly smaller than the diameter of the screws you'll be using.

Inserting The Screws

Now it's time to insert the screws. Start by threading the screws through the holes in the door handle. Then, use a screwdriver to tighten the screws until they're snug. Don't overtighten the screws, as this could damage the wood.

Finishing Touches

Once the door handles are in place, you can add the finishing touches. This may include adding decorative caps or washers to the screws. You can also use a damp cloth to wipe away any excess dirt or debris.

Tips

Here are a few tips to help you fit door handles on kitchen units:

Use a level to make sure the door handles are straight.
Tighten the screws evenly to prevent the wood from splitting.
If you're replacing old door handles, make sure to remove the old screws completely before installing the new ones.
If you're not sure how to fit door handles on kitchen units, consult a professional for help.

Conclusion

Fitting door handles on kitchen units is a relatively simple task that can be completed in a few minutes. By following the steps outlined in this article, you can ensure that your door handles are secure and function properly.