How To Fit Kitchen Kickboards

Kitchen kickboards add a stylish and practical finishing touch to your kitchen design. They not only complete the look but also protect the base of your cabinets from moisture and damage. Fitting kitchen kickboards is a relatively straightforward task that can be completed in a few simple steps. Here is a comprehensive guide to help you through the process:

1. Measure and Cut the Kickboards

Begin by measuring the length of the space where you need to install the kickboards. Cut your kickboards to the appropriate measurements using a miter saw or a fine-toothed handsaw. Ensure the cuts are accurate to provide a seamless fit.

2. Apply Adhesive and Position the Kickboards

Apply a generous bead of high-quality adhesive to the back of the kickboards. Carefully position the kickboards along the base of the cabinets, pressing them firmly into place. Use a level to ensure they are straight and level.

3. Secure the Kickboards with Screws or Nails

To provide added stability, you can secure the kickboards using screws or nails. Drill pilot holes into the kickboards and cabinets at an angle. Drive in the screws or nails and countersink them slightly below the surface.

4. Fill Nail or Screw Holes

Once the kickboards are secured, fill in any nail or screw holes with matching filler. Allow the filler to dry completely and then sand it down to create a smooth surface.

5. Seal the Edges

To prevent water damage, it is recommended to seal the exposed edges of the kickboards with silicone sealant. Apply the sealant along the top and bottom edges and smooth it out using a damp finger or a plastic spatula.

6. Finishing Touches

Finally, wipe down the kickboards with a damp cloth to remove any excess sealant or adhesive. Check for any gaps or imperfections and fill them in as necessary. Once everything is set, your kitchen kickboards are complete and ready to protect and enhance the look of your kitchen.