How To Fit Under Cabinet Kitchen Lights

Under cabinet lighting is a great way to add extra light to your kitchen work surfaces. It's also a relatively easy job to do yourself. Here are the steps on how to fit under cabinet kitchen lights:

Tools and materials you'll need:

Under cabinet lighting kit
Drill
Screwdriver
Measuring tape
Pencil
Level

Step 1: Plan the layout

The first step is to plan the layout of your under cabinet lighting. Decide where you want the lights to be placed and how many you will need. It's a good idea to measure the length of the area you want to light and divide it by the length of each light to determine how many you need.

Step 2: Mark the drill holes

Once you have planned the layout, mark the positions of the drill holes for the mounting brackets. Use a pencil and level to mark the holes accurately.

Step 3: Drill the pilot holes

Use a drill to drill the pilot holes for the mounting brackets. Make sure the holes are the correct size for the screws that will be used to secure the brackets.

Step 4: Install the mounting brackets

Screw the mounting brackets into the pilot holes using a screwdriver. Make sure the brackets are securely tightened.

Step 5: Connect the wires

Connect the wires from the under cabinet lighting kit to the wires from the mounting brackets. Make sure the connections are secure and that the polarity is correct (positive to positive, negative to negative).

Step 6: Install the light fixtures

Slot the light fixtures into the mounting brackets. Make sure the fixtures are securely in place.

Step 7: Test the lights

Turn on the lights and check that they are working properly. If any lights are not working, check the connections and make sure that the power is turned on.

Tips:

Use a dimmer switch to control the brightness of the lights.
If you have a lot of under cabinet lighting, consider using a transformer to reduce the voltage and power consumption.
Under cabinet lighting can be used to create a variety of effects. For example, you can use it to highlight a backsplash or to create a more ambient lighting effect.