How To Fix Kitchen Cabinet Doors That Won T Close Properly

How To Fix Kitchen Cabinet Doors That Won't Close Properly

Kitchen cabinet doors that won't close properly can be frustrating and inconvenient. It can also be a sign of a more serious problem with your cabinets. If you're having trouble getting your cabinet doors to close, there are a few things you can check to try to fix the problem.

Check the Hinges

The hinges are one of the most common causes of cabinet doors that won't close properly. Over time, the hinges can become loose or misaligned, which can cause the door to sag or not close all the way. To check the hinges, open the door and look at the hinge screws. If the screws are loose, tighten them with a screwdriver. If the hinges are misaligned, you may need to adjust them. To do this, loosen the screws on the hinge and move the hinge until the door is aligned properly. Then, tighten the screws.

Check the Door Strike Plate

The door strike plate is the metal plate that the door latch catches onto when the door is closed. If the strike plate is not aligned properly, the door will not be able to close all the way. To check the strike plate, open the door and look at the latch. The latch should be centered on the strike plate. If it is not, loosen the screws on the strike plate and move it until the latch is centered. Then, tighten the screws.

Check the Door Jamb

The door jamb is the frame that the cabinet door fits into. If the door jamb is not square, the door will not be able to close properly. To check the door jamb, use a level to check the vertical and horizontal sides of the jamb. If the jamb is not square, you may need to shim it with a piece of wood or cardboard. To do this, insert the shim between the jamb and the cabinet and tap it into place with a hammer.

Check the Cabinet Box

In some cases, the cabinet box itself may be the cause of the problem. If the cabinet box is not square, the door will not be able to close properly. To check the cabinet box, use a level to check the top, bottom, and sides of the box. If the box is not square, you may need to shim it with a piece of wood or cardboard. To do this, insert the shim between the box and the wall and tap it into place with a hammer.