How To Fix Kitchen Wall Units Plasterboard

Kitchen wall units are an essential part of any kitchen, providing storage space for your dishes, cookware, and other kitchen essentials. However, over time, these units can become damaged or loose, especially if they are not properly installed. If you're experiencing problems with your kitchen wall units, don't worry – you can fix them yourself with a little time and effort.

Here's how to fix kitchen wall units plasterboard:

1. Check the Screws

The first step is to check the screws that are holding the units in place. Over time, these screws can become loose, causing the units to sag or come loose. Simply tighten the screws with a screwdriver until they are snug.

2. Replace Loose Plasterboard

If the plasterboard behind the units is loose, it can cause the units to pull away from the wall. To fix this, you will need to remove the units and replace the loose plasterboard. To do this, use a knife to score the plasterboard around the edges of the unit. Then, use a hammer and chisel to carefully remove the loose plasterboard.

Once the loose plasterboard has been removed, you can replace it with a new piece of plasterboard. Cut the new plasterboard to size and then use adhesive to attach it to the wall. Once the adhesive has dried, you can reattach the units.

3. Shim the Units

If the units are still loose after you have tightened the screws and replaced the loose plasterboard, you may need to shim them. Shimming is the process of adding small pieces of material between the units and the wall to level them out. To shim the units, use a level to determine where the units are out of level. Then, cut some thin pieces of wood or plastic to the appropriate size and insert them between the units and the wall.

4. Reattach the Units

Once the units are level, you can reattach them to the wall. To do this, use screws to secure the units to the studs in the wall. Make sure that the screws are long enough to penetrate the studs, but not so long that they go through the other side of the wall.

5. Finish Up

Once the units are reattached, you can finish up by filling in any gaps between the units and the wall with caulk. This will help to keep the units in place and prevent dust and moisture from getting in.

Fixing kitchen wall units plasterboard is a relatively simple task that can be completed in a few hours. By following these steps, you can ensure that your kitchen units are secure and level.