How To Install Kitchen Cabinet Handles And Knobs

How to Install Kitchen Cabinet Handles and Knobs

Installing kitchen cabinet handles and knobs is a relatively easy project that can instantly update the look of your kitchen. With a few simple tools and a little patience, you can have your new hardware installed in no time.

Tools and Materials

Screwdriver (Phillips or flathead, depending on the screws)
Measuring tape or ruler
Pencil
Cabinet handles or knobs
Screws (if not included with the hardware)

Step-by-Step Instructions

1. Measure and Mark the Hole Placement

Start by measuring and marking the center of each cabinet door or drawer where you want to install the handle or knob. Use a pencil to make a small dot.

2. Drill Pilot Holes

If the screws provided with your hardware are too large for the pre-drilled holes in your cabinet, you will need to drill pilot holes. Use a drill bit that is slightly smaller than the screw diameter and drill a hole at each marked center.

3. Attach the Hardware

Align the handle or knob with the pilot holes and insert the screws. Tighten the screws until the hardware is secure.

4. Adjust the Height (Optional)

If your hardware is not perfectly centered, you can adjust the height by loosening the screws slightly and moving the handle or knob up or down as needed. Tighten the screws again to secure the hardware.

Tips

Use a level to ensure that your hardware is installed straight.
If you are installing multiple handles or knobs, make sure that they are all evenly spaced.
Choose hardware that complements the style of your kitchen and personal taste.
If you are replacing old hardware, be sure to remove the existing screws and fill the holes before installing the new hardware.

Conclusion

Installing kitchen cabinet handles and knobs is a simple and inexpensive way to update the look of your kitchen. With a few basic tools and a little patience, you can have your new hardware installed in no time.