How To Install Kitchen Door Hinges

Installing kitchen door hinges is a relatively simple task that can be completed in a few steps. By following these instructions, you can ensure that your kitchen door hinges are installed correctly and securely.

Tools and materials you will need:

New kitchen door hinges
Screwdriver
Drill
3/32" drill bit
Countersink bit
Wood filler
Putty knife
Sandpaper
Paint (optional)

Step 1: Remove the old hinges

Start by removing the old hinges from the kitchen door and cabinet. To do this, simply unscrew the screws that are holding the hinges in place. Once the screws are removed, you can pull the hinges off of the door and cabinet.

Step 2: Mark the hinge locations

Next, you need to mark the locations of the new hinges on the door and cabinet. To do this, simply hold the new hinge up to the door and cabinet and mark the locations of the screw holes with a pencil.

Step 3: Drill the pilot holes

Once you have marked the hinge locations, you need to drill the pilot holes for the screws. To do this, use a 3/32" drill bit to drill a pilot hole at each of the hinge screw locations.

Step 4: Countersink the holes

After you have drilled the pilot holes, you need to countersink the holes. To do this, use a countersink bit to create a small depression around each of the pilot holes. This will help to keep the screw heads from sticking out of the hinge.

Step 5: Install the hinges

Now you can install the new hinges. To do this, simply insert the screws into the pilot holes and tighten them until the hinges are secure. Be sure to not overtighten the screws, as this could damage the hinges.

Step 6: Fill the old hinge holes

Once the new hinges are installed, you need to fill the old hinge holes. To do this, simply fill the holes with wood filler and let it dry. Once the wood filler is dry, you can sand it smooth and paint it to match the finish of the kitchen door.

Step 7: Adjust the hinges

Once the wood filler is dry, you can adjust the hinges to ensure that the door is hanging properly. To do this, simply loosen the screws on the hinges and adjust the hinges until the door is level and swings smoothly. Once the door is hanging properly, tighten the screws on the hinges to secure them in place.

That's it! You have now successfully installed kitchen door hinges. By following these instructions, you can ensure that your kitchen door hinges are installed correctly and securely.