How To Install Kitchen Drawer Pulls

How to Install Kitchen Drawer Pulls

Installing kitchen drawer pulls is a relatively simple task that can be completed in a few easy steps. By following these instructions, you can give your kitchen a fresh new look in no time. ### Tools and Materials To install kitchen drawer pulls, you will need the following tools and materials: - Drawer pulls - Screwdriver - Measuring tape or ruler - Pencil or pen - Level ### Step 1: Determine the Placement The first step is to determine the placement of the drawer pulls. To do this, measure the length of the drawer front and divide it in half. This will give you the center point for the pull. Mark the center point with a pencil or pen. ### Step 2: Measure and Mark the Screw Holes Next, measure the distance between the screw holes on the drawer pull. Mark these locations on the drawer front, using a pencil or pen. Make sure that the marks are level. ### Step 3: Drill the Pilot Holes Once you have marked the screw holes, drill pilot holes using a drill bit that is slightly smaller than the screws that came with the drawer pulls. This will help to prevent the wood from splitting. ### Step 4: Install the Screws Insert the screws into the pilot holes and tighten them using a screwdriver. Be careful not to overtighten the screws, as this could damage the drawer front. ### Step 5: Repeat for Remaining Drawers Repeat steps 1-4 for the remaining drawers. Once all of the drawer pulls are installed, step back and admire your handiwork. ### Tips for Success Here are a few tips for ensuring a successful installation: - Use a level to make sure that the drawer pulls are installed evenly. - If you are installing drawer pulls on a painted or finished surface, be sure to cover the area with masking tape to protect it from scratches. - If you are unsure about the best placement for the drawer pulls, consult a professional.