How To Install Kitchen Kickboard Lights

Kitchen kickboard lights are a great way to add extra light to your kitchen, and they can also be a stylish addition to your décor. If you're thinking about installing kickboard lights in your kitchen, here's a step-by-step guide to help you get started.

1. Choose the Right Lights

The first step is to choose the right lights for your kitchen. There are a few things to consider when making your choice, including the size of your kitchen, the style of your décor, and the amount of light you need.

If you have a small kitchen, you'll want to choose lights that are compact and won't take up too much space. If you have a large kitchen, you can choose larger lights that will provide more light. You'll also want to consider the style of your décor when choosing lights. If you have a modern kitchen, you'll want to choose lights that are sleek and contemporary. If you have a traditional kitchen, you'll want to choose lights that are more classic and ornate.

Finally, you'll need to decide how much light you need. If you need a lot of light, you'll want to choose lights that are bright and have a high lumen output. If you don't need as much light, you can choose lights that are dimmer and have a lower lumen output.

2. Measure and Mark the Location of the Lights

Once you've chosen the right lights, it's time to measure and mark the location of the lights. To do this, you'll need a tape measure and a pencil. Start by measuring the length of the kickboard. Then, divide the length by the number of lights you want to install. This will give you the spacing between the lights.

Once you know the spacing, mark the location of the lights on the kickboard with a pencil. Make sure that the marks are level and evenly spaced.

3. Drill Holes for the Lights

Once you've marked the location of the lights, it's time to drill holes for the lights. To do this, you'll need a drill and a drill bit that is the same size as the diameter of the lights. Start by drilling a pilot hole at each of the marks you made in the previous step. Then, use the drill bit to drill a hole that is large enough to fit the lights.

4. Install the Lights

Once you've drilled the holes, it's time to install the lights. To do this, simply insert the lights into the holes and twist them until they are secure. Make sure that the lights are level and evenly spaced.

5. Connect the Lights to the Power Supply

Once you've installed the lights, it's time to connect them to the power supply. To do this, you'll need to use a wire connector. Start by stripping the ends of the wires on the lights. Then, twist the ends of the wires together and insert them into the wire connector. Tighten the wire connector until the wires are secure.

Once you've connected the lights to the power supply, turn on the lights and test them. Make sure that all of the lights are working properly.