How To Install Lighting Above Kitchen Cabinets

Kitchen under-cabinet lighting is a great way to improve the functionality and ambiance of your kitchen. It can provide task lighting for food preparation and cleanup, and it can also create a warm and inviting atmosphere. Installing under-cabinet lighting is a relatively simple project that can be completed in a few hours with basic tools and materials.

Materials and Tools You'll Need:

Under-cabinet lighting fixture
Tape measure
Pencil
Drill
1/8-inch drill bit
Screws
Wire nuts
Electrical tape

Step-by-Step Instructions:

1. Measure and Mark the Location of the Lighting Fixture

Use the tape measure and pencil to mark the location of the under-cabinet lighting fixture on the underside of the cabinet. Be sure to center the fixture and make sure that it is level.

2. Drill Pilot Holes

Drill two pilot holes at the ends of the marked location. This will make it easier to drive the screws into the cabinet.

3. Install the Mounting Brackets

Attach the mounting brackets to the cabinet using the screws. Be sure to tighten the screws securely.

4. Connect the Wires

Connect the wires from the under-cabinet lighting fixture to the wires from the cabinet. Be sure to match the black wire to the black wire, the white wire to the white wire, and the ground wire to the ground wire. Twist the wires together and secure them with a wire nut. Wrap the connection with electrical tape.

5. Mount the Lighting Fixture

Place the under-cabinet lighting fixture on the mounting brackets and snap it into place.

6. Test the Lighting Fixture

Turn on the power to the circuit and test the lighting fixture. Make sure that all of the lights are working properly.

7. Enjoy Your New Lighting!

Your new under-cabinet lighting is now installed and ready to use. Enjoy the improved functionality and ambiance of your kitchen!

Tips:

Use a level to make sure that the lighting fixture is level before you drill the pilot holes.
Be sure to tighten the mounting brackets securely to prevent the lighting fixture from falling down.
Connect the wires correctly to avoid electrical problems.
Test the lighting fixture before you mount it to the cabinet to make sure that all of the lights are working properly.
Use a dimmer switch to control the brightness of the lighting fixture.