How To Install Pull Out Drawers In Kitchen

Pull-out drawers are a great way to add storage and organization to your kitchen. They can be used to store anything from pots and pans to spices and utensils. Installing pull-out drawers is a relatively simple project that can be completed in a few hours.

Materials You'll Need

Pull-out drawers
Screws
Drill
Screwdriver
Level
Tape measure
Pencil

Instructions

Measure the opening for the pull-out drawers.

The opening should be the same width as the drawers and at least 2 inches taller than the drawers. 2.

Mark the location of the drawer slides on the cabinet sides.

The drawer slides should be positioned so that the top of the slides is flush with the top of the opening. 3.

Attach the drawer slides to the cabinet sides.

Use screws to attach the drawer slides to the cabinet sides. Make sure the slides are level. 4.

Insert the drawers into the slides.

The drawers should slide easily into the slides. 5.

Adjust the drawers so that they are level.

You can adjust the drawers by loosening or tightening the screws on the drawer slides. 6.

Secure the drawers in place.

Once the drawers are level, secure them in place by tightening the screws on the drawer slides.

Tips

When measuring the opening for the pull-out drawers, be sure to include the thickness of the drawer slides.
If the opening for the pull-out drawers is not perfectly square, you may need to use shims to level the drawers.
Be careful not to overtighten the screws on the drawer slides. Overtightening the screws can damage the slides.

Conclusion

Installing pull-out drawers is a relatively simple project that can add storage and organization to your kitchen. By following the steps outlined in this article, you can easily install pull-out drawers in your own kitchen.