How To Install Upper Kitchen Cabinets With Uneven Ceiling

Installing upper kitchen cabinets with an uneven ceiling can be a challenging task. However, by following these essential aspects, you can ensure a successful and professional-looking installation.

1. Determine the High Point of the Ceiling:

Using a level, locate the highest point of the ceiling in the area where the cabinets will be installed. This will serve as the reference point for leveling the cabinets.

2. Install a Leveling Ledger Board:

Create a ledger board by cutting a piece of plywood to the length of the wall where the cabinets will be mounted. Level the ledger board using shims or spacers, and secure it to the wall studs.

3. Adjust the Cabinet Heights:

Using shims or spacers, adjust the height of the cabinets to match the level of the ledger board. Ensure that the cabinets are level both front-to-back and side-to-side.

4. Secure the Cabinets to the Ledger Board:

Drive screws through the cabinets and into the ledger board, securing them in place. Use washers between the screws and the cabinets to distribute the load.

5. Scribe and Cut End Panels:

For cabinets that extend to the end of the wall, measure and scribe end panels to fit the contour of the uneven ceiling. Cut the panels accordingly and install them.

6. Install Filler Strips:

In areas where the cabinets do not fully fill the space, install filler strips to conceal any gaps between the cabinets and the ceiling.

7. Secure Filler Strips and End Panels:

Use nails or glue to secure the filler strips and end panels in place, ensuring a seamless transition between the cabinets and the ceiling.

By following these essential aspects, you can successfully install upper kitchen cabinets with an uneven ceiling, creating a professional and aesthetically pleasing finish to your kitchen.