How To Install Wren Kitchen Wall Units

How to Install Wren Kitchen Wall Units

Installing Wren kitchen wall units can seem daunting, but it's actually a straightforward task with the right tools and preparation. Follow these steps for a professional-looking finish:

Step 1: Gather Materials and Tools

To begin, you'll need the following materials and tools:

Wren kitchen wall units
Screws
Drill
Screwdriver
Spirit level
Wall plugs (if necessary)

Step 2: Plan and Measure

Before installing the wall units, plan their placement carefully. Measure the available space and mark the desired positions on the wall. Use a spirit level to ensure that the units will be level when installed.

Step 3: Attach Wall Plates

The first step in physically installing the wall units is to attach the wall plates. Hold each plate against the marked position and secure it with screws. Ensure that the plates are level and spaced evenly.

Step 4: Hang the Wall Units

Once the wall plates are in place, hang the wall units onto them. Align each unit with the corresponding wall plate and push it up until it slots into place. Use screws to secure it to the wall plates.

Step 5: Level and Adjust

After hanging the wall units, check again that they are level using a spirit level. Adjust the screws or wall plates as necessary to ensure that the units are level and secure. If the wall is uneven, you may need to use wall plugs to prevent the units from pulling away from the wall.

Step 6: Install Doors and Shelves

Finally, install the doors and shelves on the wall units. First, attach the shelves to the sides of the units using screws. Then, fix the doors to the hinges and adjust them so that they open and close smoothly.

Step 7: Finishing Touches

Once all the units are installed, apply finishing touches to perfect the look. This may include adding handles, knobs, or other decorative elements to match your kitchen design.

Congratulations! You have successfully installed your Wren kitchen wall units. Enjoy your new and improved kitchen space.