How To Level Kitchen Cabinets On Uneven Floor

Uneven floors can pose a challenge when installing kitchen cabinets. However, with some knowledge and preparation, you can overcome this issue and ensure your cabinets are level and properly aligned.

Assess the Floor

Before you begin, carefully examine the floor to identify any uneven areas. Use a level to check for dips or slopes. If the unevenness is minor, shims or leveling feet can be used to adjust the cabinets. For more significant variations, the floor may need to be leveled with a self-leveling compound or planks.

Install Adjustable Cabinets

Kitchen cabinets with adjustable feet or legs make it easier to level them on uneven floors. Simply adjust the feet until the cabinet is level. Alternatively, you can use leveling shims, which are thin, angled wedges that can be placed under the feet to compensate for small height differences.

Use Leveling Feet

Leveling feet can be purchased separately and installed on the base of the cabinets. These feet consist of a threaded rod and a round base that can be adjusted to the desired height. By rotating the rod, you can extend or retract the feet until the cabinet is level.

Install Blocking

For larger or heavier cabinets, it may be necessary to install blocking between the floor and the cabinet. Blocking is a piece of lumber that is placed under the cabinet to provide additional support and leveling. Use a level to ensure that the blocking is level and parallel to the floor.

Install a Plinth Block

If the unevenness of the floor creates a gap between the bottom of the cabinets and the floor, you can install a plinth block. A plinth block is a thin strip of wood or plastic that provides a decorative finish while covering the gap and providing stability.

Tips for Leveling Kitchen Cabinets on Uneven Floor

Use a level throughout the process to ensure accuracy.
Adjust the leveling feet or shims in small increments to prevent over-adjustment.
Double-check your work after adjusting the cabinets to ensure they are stable and level.
If the unevenness is severe, consider consulting a professional installer for assistance.
Use a combination of leveling methods to achieve the desired result.