How To Measure Kitchen Cupboard Handles

How to Measure Kitchen Cupboard Handles

Measuring kitchen cupboard handles correctly is essential for ensuring a perfect fit and a professional-looking finish. Whether you're replacing old handles or installing new ones, taking accurate measurements will save you time and frustration.

Here's a step-by-step guide on how to measure kitchen cupboard handles:

1. Measure the Center-to-Center Distance

The center-to-center distance refers to the distance between the two screw holes on the handle. This measurement determines the spacing of the holes on the cupboard door or drawer.

To measure the center-to-center distance, use a measuring tape or ruler and place it directly over the screw holes. Measure from the center of one hole to the center of the other hole. Record the measurement in millimeters or inches.

2. Measure the Hole Diameter

The hole diameter is the size of the screws that will fit through the holes on the handle. It's important to ensure that the screw heads fit snugly within the holes to provide a secure attachment.

To measure the hole diameter, use a caliper or a drill bit gauge. Insert the caliper or drill bit into the hole and measure the diameter in millimeters or inches. Record this measurement.

3. Measure the Projection Length

The projection length is the distance from the face of the cupboard door or drawer to the edge of the handle. This measurement determines how far the handle protrudes from the surface.

To measure the projection length, place the handle on the cupboard door or drawer and hold it in place. Measure from the inside edge of the door or drawer to the outermost point of the handle. Record this measurement.

4. Measure the Overall Length

The overall length is the total length of the handle from one end to the other. This measurement is useful for determining the handle's overall appearance and ensuring it fits within the available space.

To measure the overall length, place the handle on a flat surface and measure from one end to the other. Record this measurement.

Tips for Accurate Measurements

Use a precision measuring tool such as a measuring tape or ruler with millimeter or inch markings.
Ensure the measuring tape or ruler is straight and not bent.
Take multiple measurements to ensure accuracy and avoid parallax errors.
Record all measurements clearly and in the same unit of measurement (e.g., millimeters or inches).
If the cupboard door or drawer has any obstructions, such as moldings or raised panels, take these into account when measuring.