How To Put Kitchen Cabinet Handles On

```

Installing kitchen cabinet handles is a relatively easy task that can be completed with a few simple tools and a little know-how. By following the tips and tricks outlined in this article, you can ensure that your new cabinet handles are installed correctly and look great for years to come.

1. Gather Your Materials and Tools

```

Before you begin, gather all of the materials and tools you'll need. These include:

New cabinet handles
Screwdriver
Drill
1/8-inch drill bit
Tape measure
Level
Pencil

2. Measure and Mark the Handle Holes

```

Using a tape measure and pencil, measure and mark the location of the screw holes for the cabinet handles. The standard distance between screw holes is 3 inches, but you may need to adjust this distance depending on the size of your handles and cabinets. Once you have marked the screw hole locations, use a level to make sure they are level.

3. Drill Pilot Holes

```

Using a drill and 1/8-inch drill bit, drill pilot holes at the marked screw hole locations. These pilot holes will help to prevent the wood from splitting when you install the screws.

4. Install the Cabinet Handles

```

Insert the screws into the pilot holes and tighten them until the handles are secure. Be careful not to overtighten the screws, as this can damage the handles or the cabinet.

5. Stand Back and Admire Your Work!

```

Once you have installed all of the cabinet handles, stand back and admire your work! Your kitchen cabinets will look refreshed and new, and you'll be glad you took the time to do it yourself.