How To Put Knobs On Kitchen Cabinets

How to Put Knobs on Kitchen Cabinets

Updating your kitchen cabinet knobs is a simple and affordable way to give your kitchen a fresh new look. Here are the steps you need to follow:

Materials You'll Need:

New cabinet knobs
Screwdriver
Measuring tape or ruler
Pencil or marking tool
Drill (for drilling pilot holes)
Drill bit (1/16 inch or smaller)

Step-by-Step Instructions:

1. Remove the Old Knobs:

Using a screwdriver, carefully unscrew the old knobs from the cabinet doors or drawers. If the knobs are stuck, you can use a rocking motion to loosen them.

2. Measure and Mark the New Knob Placement:

Determine the desired placement of the new knobs. Measure and mark the center point for each knob using a pencil or marking tool. The standard distance between knobs on cabinet doors is 3 inches from the top and 3 inches from the sides.

3. Drill Pilot Holes (Optional):

If your cabinet doors or drawers are made of hard materials like metal or thick wood, drilling pilot holes will make it easier to insert the screws. Use a drill with a 1/16 inch drill bit to create small pilot holes at each marked location.

4. Attach the New Knobs:

Insert the screws through the knobs and align them with the pilot holes (if drilled). Use a screwdriver to tighten the screws securely, but do not overtighten them.