How To Put Pulls On Kitchen Cabinets

How to Install Pulls on Kitchen Cabinets

Installing pulls on kitchen cabinets is an important step in completing the look of your kitchen. Pulls provide a way to open and close the cabinets easily and add a touch of style. Here are the essential steps on how to put pulls on kitchen cabinets:

1. Gather your materials

Before you begin, you will need the following materials:

Cabinet pulls
Screwdriver
Drill (optional)
Measuring tape or ruler
Pencil

2. Determine the placement of the pulls

The first step is to determine where you want to place the pulls on the cabinets. The most common placement is in the center of the cabinet door or drawer. However, you can also place them off-center if you prefer. Use a measuring tape or ruler to mark the desired location of each pull.

3. Drill pilot holes (optional)

If you are installing pulls on hardwood or other hard materials, it is a good idea to drill pilot holes first. This will make it easier to screw in the pulls and prevent the wood from splitting. Use a drill bit that is slightly smaller than the diameter of the pull screws.

4. Screw in the pulls

Once you have determined the placement of the pulls and drilled pilot holes (if necessary), it is time to screw them in. Use a screwdriver to drive the screws into the cabinet door or drawer. Be sure to tighten the screws securely, but do not overtighten them.

5. Check the alignment

Once all of the pulls are installed, check to make sure that they are aligned properly. If any of the pulls are crooked, you can adjust them by loosening the screws and repositioning them.