How To Remove Drawer From Home Depot Kitchen Cabinets

How to Remove a Drawer from Home Depot Kitchen Cabinets

Removing a drawer from Home Depot kitchen cabinets is a relatively simple task that can be completed in a few minutes with the right tools. By following the steps below, you can safely remove your drawers without damaging them or the cabinets.

Tools You'll Need

Phillips head screwdriver
Flathead screwdriver (optional)

Step-by-Step Instructions

Step 1: Open the drawer and locate the screws.

There will typically be two screws on each side of the drawer, located near the top of the drawer slide.

Step 2: Remove the screws.

Using a Phillips head screwdriver, remove the screws from one side of the drawer.

Step 3: Tilt the drawer slightly.

Once the screws are removed, tilt the drawer slightly towards you. This will disengage the drawer from the slide on that side.

Step 4: Repeat on the other side.

Remove the screws from the other side of the drawer and repeat step 3 to disengage the drawer from the slide on that side.

Step 5: Pull the drawer straight out.

Once both sides of the drawer are disengaged from the slides, you can pull the drawer straight out of the cabinet.

Step 6: If necessary, use a flathead screwdriver to pry the drawer loose.

In some cases, the drawer may be stuck in the cabinet. If this happens, use a flathead screwdriver to gently pry the drawer loose from the slides.

Tips

* If you are having difficulty removing the screws, try using a larger Phillips head screwdriver. * Be careful not to damage the drawer or the cabinet when prying it loose. * If the drawer is still stuck, try tapping it lightly with a hammer to loosen it.

How To Fix A Broken Drawer The Home Depot

Hampton Bay Shaker 18 In W X 24 D 34 5 H Assembled Drawer Base Kitchen Cabinet Satin White With Ball Bearing Glides Kdb18 Ssw The Home Depot

Have A Question About Hampton Bay Shaker 18 In W X 24 D 34 5 H Assembled Drawer Base Kitchen Cabinet Satin White With Ball Bearing Glides Pg 1 The Home Depot