How To Replace Kitchen Drawer Fronts

How to Replace Kitchen Drawer Fronts

Updating your kitchen drawer fronts is a simple and cost-effective way to give your space a fresh look. Whether you're looking to change the color, style, or material of your drawers, replacing the fronts is a relatively easy DIY project that can be completed in a few hours.

Materials You'll Need

New drawer fronts
Screwdriver
Drill (optional)
Measuring tape or ruler
Pencil

Step-by-Step Instructions

1. Remove the Old Drawer Fronts

Start by removing the screws that are holding the old drawer fronts in place. You may need to use a drill to remove any screws that are stripped or difficult to turn.

2. Measure and Mark the New Drawer Fronts

Next, measure the height and width of the drawer openings. Use a pencil to mark the measurements on the new drawer fronts.

3. Attach the New Drawer Fronts

Place the new drawer fronts over the drawer openings, aligning the marks you made earlier. Secure the drawer fronts with screws, making sure to use the appropriate screw length for the thickness of the drawer fronts.

4. Adjust the Drawer Fronts

Once the drawer fronts are attached, check to make sure they are properly aligned. Adjust the screws as needed to ensure that the drawer fronts are level and open and close smoothly.

5. Finish Up

Clean up any sawdust or debris and admire your newly updated kitchen drawer fronts.

Tips

If you are installing new drawer fronts that are a different size than the old ones, you may need to adjust the drawer slides to ensure that the drawers open and close smoothly.
Use a drill with a countersink bit to countersink the screws below the surface of the drawer fronts for a more professional-looking finish.
For a more secure hold, add a drop of wood glue to the back of the drawer fronts before attaching them to the drawers.