How To Turn Kitchen Cupboards Into Shaker Style

How to Turn Kitchen Cupboards Into Shaker Style

The Shaker style, characterized by its clean lines and simplicity, has become increasingly popular in modern kitchen design. If you're looking to update your kitchen without breaking the bank, consider transforming your existing cupboards into Shaker style. This DIY project is surprisingly easy and affordable, and it can completely revitalize the look of your kitchen.

Materials You'll Need:

1x2 pine or poplar boards
Wood filler
Sandpaper
Primer
Paint
Wood screws
Drill
Countersink bit
Measuring tape
Level

Step-by-Step Instructions:

1. Measure and Cut the Rails and Stiles

Determine the desired height and width of your Shaker panels. Cut 1x2 pine or poplar boards to these dimensions for the rails (horizontal pieces) and stiles (vertical pieces).

2. Create the Panels

Lay the stiles and rails on a flat surface, forming a rectangle. Ensure that the pieces are square and level. Drill pilot holes and secure them with wood screws. Countersink the screws below the surface.

3. Fill and Sand the Holes

Apply wood filler to the screw holes and allow it to dry. Once dry, sand the surface smooth.

4. Attach the Panels to the Doors

Position the Shaker panels on the kitchen cupboard doors. Use clamps to hold them in place, then drill pilot holes and secure them with wood screws.

5. Prime and Paint

Apply a coat of primer to the doors to ensure even paint coverage. Once the primer has dried, paint the doors in your desired color.

Tips:

Use a countersink bit to create a clean and professional-looking finish.

Sand the edges of the panels to soften any sharp edges.

Consider adding a beadboard back to the inside of the cupboards for an extra touch of style.

By following these steps, you can easily transform your kitchen cupboards into stylish Shaker style doors, giving your kitchen a fresh and updated look without the cost of a complete remodel.