How To Use Minwax Gel Stain On Kitchen Cabinets

How to Use Minwax Gel Stain on Kitchen Cabinets

If you're looking to give your kitchen cabinets a fresh, updated look, Minwax Gel Stain is a great option. Gel stain is thick and easy to apply, and it produces a beautiful, rich finish. Here's a step-by-step guide on how to use Minwax Gel Stain on kitchen cabinets:

Step 1: Prepare the Cabinets

Before you start staining, it's important to prepare the cabinets. This involves cleaning them thoroughly with a degreaser to remove any dirt or grease. Once the cabinets are clean, sand them lightly with a fine-grit sandpaper to smooth out any rough spots.

Step 2: Apply the Gel Stain

Apply the gel stain to the cabinets using a brush or a sponge. Work in small sections, and apply the stain in even strokes. Be sure to work the stain into the grain of the wood. Allow the stain to sit for the amount of time specified on the can. This will vary depending on the color of the stain and the desired effect.

Step 3: Wipe Off the Excess Stain

After the stain has set, wipe off the excess with a clean cloth. Be sure to wipe in the direction of the grain. If you're not happy with the color, you can apply additional coats of stain until you get the desired effect.

Step 4: Protect the Finish

Once you're satisfied with the color, protect the finish with a clear coat. This will help to seal the stain and protect it from wear and tear. You can use a polyurethane or a lacquer finish. Apply the clear coat according to the manufacturer's instructions.