How To Wrap Kitchen Cabinets

How to Wrap Kitchen Cabinets

Wrapping kitchen cabinets is a great way to give them a new look without having to replace them. It's a relatively easy project that can be done in a weekend, and it can make a big impact on the look of your kitchen. Here's a step-by-step guide on how to wrap kitchen cabinets:

Materials needed:

Contact paper
Measuring tape
Scissors
Exacto knife
Squeegee

Instructions:

1. Clean the cabinets: The first step is to clean the cabinets thoroughly. Remove all of the hardware, and then wipe down the cabinets with a damp cloth. Allow the cabinets to dry completely before proceeding.

2. Measure the cabinets: Once the cabinets are clean, you need to measure them to determine how much contact paper you'll need. Measure the width and height of each cabinet door and drawer front. Add 2 inches to each measurement to allow for overlap.

3. Cut the contact paper: Cut the contact paper to the size of the cabinet doors and drawer fronts. Be sure to cut the paper with the grain running vertically.

4. Apply the contact paper: Peel off the backing of the contact paper and carefully apply it to the cabinet door or drawer front. Use a squeegee to smooth out the paper and remove any air bubbles.

5. Trim the excess paper: Use an exacto knife to trim the excess paper around the edges of the cabinet door or drawer front.

6. Reinstall the hardware: Once the contact paper is applied, you can reinstall the hardware. Be sure to use screws that are long enough to penetrate the contact paper and the cabinet door or drawer front.

Tips for wrapping kitchen cabinets:

Use a sharp exacto knife to cut the contact paper. A dull knife will tear the paper.
Apply the contact paper slowly and carefully. If you rush, you'll likely end up with air bubbles or wrinkles.
Use a squeegee to smooth out the contact paper. This will help to prevent air bubbles and wrinkles.
Be patient. Wrapping kitchen cabinets can take some time, but it's worth it in the end.