Replacing Kitchen Cabinet Hinges Concealed

Kitchen cabinet hinges concealed are a vital element of cabinetry, providing smooth and effortless opening and closing of cabinet doors. Over time, these hinges can wear out or become damaged, affecting the functionality and aesthetics of your kitchen. Replacing them can be a relatively straightforward DIY project with the right tools and a bit of patience.

Before you start, gather the necessary materials, including new concealed hinges, a screwdriver or drill, a 35mm Forstner bit or hinge boring bit, and a hammer or mallet. Ensure you have the correct hinge size and type for your cabinets by carefully measuring the current hinges and the cabinet door.

To remove the old hinges, open the cabinet door and locate the release lever or button on the hinge. Press or slide to detach the door from the cabinet frame. Once detached, use a screwdriver or drill to remove the screws securing the hinges to the cabinet frame and door. Carefully remove the old hinges.

Now it's time to install the new hinges. First, mark the hinge positions on the cabinet door and frame using the 35mm Forstner bit or hinge boring bit. This bit creates a recessed area for the hinge cup to sit flush against the surface. Drill the holes and ensure they are aligned correctly.

Next, insert the hinge cups into the recessed areas you drilled. Tap them in gently with a hammer or mallet until they are seated firmly. Now, align the hinge arms with the holes on the cabinet door and insert the screws. Tighten the screws securely, but avoid overtightening.

Finally, repeat the process for the cabinet frame. Align the hinge arms with the holes and insert the screws. Again, tighten them securely but not excessively. Once both hinges are installed, reattach the cabinet door to the frame by pressing or sliding the release lever or button.

Congratulations! You have successfully replaced your kitchen cabinet hinges concealed. Test the hinges by opening and closing the door several times to ensure they operate smoothly and without any binding. If any adjustments are needed, loosen the screws slightly, make the adjustment, and tighten the screws again.